I have more than a small quantity of brand new hydraulic motors (around 2017 manufacture date) that were spec'd as drive motors for hydraulic winches. The company was restructured, I bought some of the product lines and these motors are now surplus.
I have Parker, White and Danfoss.
If I put these on Ebay I'll probably get $100 a piece for the smaller sizes and the bigger ones seem to sell around $500-$1000. It will take me years to sell them all.
If I can sell them here at a low price that gets them moved rapidly (like what I did with synthetic winch lines) that would be great. If it's a low price and they don't move quickly then the higher prices and Ebay make the most sense.
Do any of you fellows have interest in buying hydraulic motors at, say, $100 for two of them delivered?
Almost all have SAE O-ring ports, 1.000" keyed shafts, 2 or 4 bolt mounting flanges.
As an example, I have around 40 of these White WP (155) series motors part number 155125A1110AAAAA http://www.cenhyd.com/pdf/white/wp_catalog.pdf
7.6 cu/in/rev
2-Hole, SAE A Mount, Aligned Ports, 7/8-14 UNF
1" straight keyed shaft with 8mm internal threads
RPM cont. 559
RPM max. 599
GPM cont. 16
GPM max. 20
Cont. tq in/lb 2285
Max tq in/lb 2460
Cont. PSI 2320
Intermittent PSI 2540
Max PSI 3480
I have Parker, White and Danfoss.
If I put these on Ebay I'll probably get $100 a piece for the smaller sizes and the bigger ones seem to sell around $500-$1000. It will take me years to sell them all.
If I can sell them here at a low price that gets them moved rapidly (like what I did with synthetic winch lines) that would be great. If it's a low price and they don't move quickly then the higher prices and Ebay make the most sense.
Do any of you fellows have interest in buying hydraulic motors at, say, $100 for two of them delivered?
Almost all have SAE O-ring ports, 1.000" keyed shafts, 2 or 4 bolt mounting flanges.
As an example, I have around 40 of these White WP (155) series motors part number 155125A1110AAAAA http://www.cenhyd.com/pdf/white/wp_catalog.pdf
7.6 cu/in/rev
2-Hole, SAE A Mount, Aligned Ports, 7/8-14 UNF
1" straight keyed shaft with 8mm internal threads
RPM cont. 559
RPM max. 599
GPM cont. 16
GPM max. 20
Cont. tq in/lb 2285
Max tq in/lb 2460
Cont. PSI 2320
Intermittent PSI 2540
Max PSI 3480