northernsinger
Titanium
- Joined
- Aug 19, 2004
- Location
- New England
Monarch 10EE lathe, c. 1952, untried, could be electrical project, 550 volt w/transformer 1200
Weiler 280 lathe small 3 phase, project 400
Worthington 100 gal. Horizontal air compressor 5 hp single phase 220 v. un-needed, untried 250
Royersford drill 220 single phase may need belt, height adjustment etc 300
Barnes 20 inch drill press with belts and 110 single phase motor, works, in use, 250
Van Norman mill 220 single phase 700 working
sensitive drill press poss Dwight Slate belt drive w/ motor 110 single phase (needs return spring fixed ) 150
Hisey-Wolf buffer 220 3 phase, missing one nut 3 phase 200
shop made 5 HP (220/440 3 phase) heavy buffer, ready to use 350
buffer, heavy motor head only, no stand no nuts or collars 65
shop made very well done hand surface grinder, mag chuck 200
2- 5 ton Benchmaster open bed inclinable (OBI) punch presses, heavy fly wheels, 1/2 and 3/4 hp single phase 110 v motors,
on cast iron stands, 250 each
Henry Lange 4 by 106 belt vertical sander/grinder (orig made for glass and coolant, but good for metal) 250
K.O. Lee radial grinding fixture B885 565
Pratt & Whitney DiaForm wheel grinding pantagraph 120
post vises (2) 125 for either
Champion Western Chief No 3 forge 300, needs repair
Landis bolt cutter, w/.Drive-All,with dies, presently 220 two phase, easy motor switch to 1 or 3 phase, 1000
Please call Robert at eight-oh-two-453-4225, or email at [email protected] email preferred. Thank you.
Weiler 280 lathe small 3 phase, project 400
Worthington 100 gal. Horizontal air compressor 5 hp single phase 220 v. un-needed, untried 250
Royersford drill 220 single phase may need belt, height adjustment etc 300
Barnes 20 inch drill press with belts and 110 single phase motor, works, in use, 250
Van Norman mill 220 single phase 700 working
sensitive drill press poss Dwight Slate belt drive w/ motor 110 single phase (needs return spring fixed ) 150
Hisey-Wolf buffer 220 3 phase, missing one nut 3 phase 200
shop made 5 HP (220/440 3 phase) heavy buffer, ready to use 350
buffer, heavy motor head only, no stand no nuts or collars 65
shop made very well done hand surface grinder, mag chuck 200
2- 5 ton Benchmaster open bed inclinable (OBI) punch presses, heavy fly wheels, 1/2 and 3/4 hp single phase 110 v motors,
on cast iron stands, 250 each
Henry Lange 4 by 106 belt vertical sander/grinder (orig made for glass and coolant, but good for metal) 250
K.O. Lee radial grinding fixture B885 565
Pratt & Whitney DiaForm wheel grinding pantagraph 120
post vises (2) 125 for either
Champion Western Chief No 3 forge 300, needs repair
Landis bolt cutter, w/.Drive-All,with dies, presently 220 two phase, easy motor switch to 1 or 3 phase, 1000
Please call Robert at eight-oh-two-453-4225, or email at [email protected] email preferred. Thank you.
