mikemachine8
Plastic
- Joined
- Oct 18, 2019
New face plates now available for ACRA TURN LC-1340G and other 13" ACRA TURN models.
These laser etched .060” thick 2 color laminated black/white vinyl plates for headstock, carriage and electric control panel will replace your old faded unreadable plates and dress up your lathe.
Etching through the black colored face and into the white colored backing laminate lasts longer and is more defined than the original stenciled painted on graphics which fade away over time.
The headstock plate is one single plate rather than the top and bottom two-plate set up as originally used and is a much cleaner design.
I have also simplified some of the original layout graphics for ease of reading and understanding.
Due to the layout tolerance variance in manufacturing by ACRA, some clearance holes around dials, oil level sight glass, etc may need some slight hand filing to fit properly to your lathe. Also the small screw mounting hole layout to affix these plates will have to be transferred from your original plates and drilled by you and fitted to your lathe.
$175.00 per set of three plates and no mounting screws are supplied as you can use your originals.
Shipping cost will be additional and have to be calculated to your specific address.
NOTE: Some modifications of lathe model number (such as LC-1340GLN, etc.) or addition or deletion of lettering/graphics or if your lathe doesn't have COOLANT or an E STOP brake or plates can also be left blank or re etched as to graphics needed for your specific lathe at an additional charge.
Mike Cates
(760) 473-6201 Voice Calls Only(No Texts Please)
OR email me at: [email protected]
These laser etched .060” thick 2 color laminated black/white vinyl plates for headstock, carriage and electric control panel will replace your old faded unreadable plates and dress up your lathe.
Etching through the black colored face and into the white colored backing laminate lasts longer and is more defined than the original stenciled painted on graphics which fade away over time.
The headstock plate is one single plate rather than the top and bottom two-plate set up as originally used and is a much cleaner design.
I have also simplified some of the original layout graphics for ease of reading and understanding.
Due to the layout tolerance variance in manufacturing by ACRA, some clearance holes around dials, oil level sight glass, etc may need some slight hand filing to fit properly to your lathe. Also the small screw mounting hole layout to affix these plates will have to be transferred from your original plates and drilled by you and fitted to your lathe.
$175.00 per set of three plates and no mounting screws are supplied as you can use your originals.
Shipping cost will be additional and have to be calculated to your specific address.
NOTE: Some modifications of lathe model number (such as LC-1340GLN, etc.) or addition or deletion of lettering/graphics or if your lathe doesn't have COOLANT or an E STOP brake or plates can also be left blank or re etched as to graphics needed for your specific lathe at an additional charge.
Mike Cates
(760) 473-6201 Voice Calls Only(No Texts Please)
OR email me at: [email protected]
