Power feed motor for Bridgeport X & Y series 2 Wanted
Close
Login to Your Account
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2007
    Location
    Posts
    93
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default Power feed motor for Bridgeport X & Y series 2 Wanted

    I have an older series 2 11"x58" Bridgeport mill with a J head. It has 2 power feed motors. 1 for the knee & 1 for the saddle & table. The one for the saddle & table is missing. Any body have any suggestions. If I could even get a bad one I would be happy to have it rebuilt. Thanks, Mark

  2. Likes tnelso54 liked this post
  3. #2
    Join Date
    Feb 2011
    Location
    Minnesota
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Mark, were you able to find a motor for your Series II? I also have one with the power feed motor for the X & Y axis missing, and my Knee motor is burnt up. If you found a source please let me know.

    Thanks, Joe

  4. #3
    Join Date
    Nov 2002
    Location
    Oakdale, MN USA
    Posts
    552
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    8

    Default motors

    I have 3 of the X power feed motors that I ended up with. One is black and does not work, but the light lights up.
    The other 2 were used on a large planer that had a Bridgeport head mounted on the crossbeam and were used to drive the X & Y axis. The circuit boards and controls were taken out and mounted on a panel on the side of the machine. They would have to be put back together to use.
    If interested email me.
    Gordo
    [email protected]


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •