Finegrain
Diamond
- Joined
- Sep 6, 2007
- Location
- Seattle, Washington
I have 3 unclaimed kits of the batch of 10 I recently made (you may have seen the discussions on the Clausing Yahoo group. If not, here are the details).
(All gears are 16DP 14.5* PA)
127/100 transposing pair (80 kPSI ductile iron, all the other gears are 1144SP)
60 tooth idler
16, 20, 24, and 28 tooth stud gears
20, 25, and 50 tooth screw gears
Metric bracket in 6061 Al
Assorted spacers and fasteners
With this kit you can cut all of the pitches that the OEM Clausing kit allowed, except 5.5, 0.3, and 0.25mm
There are two different versions of the bracket, one for 4900 and earlier 5900 (before SN 502100) and another for 5900 after SN 502100. I have both versions of the brackets.
Cost is $340 + $12 USA shipping
Thanks, and regards.
Mike
(All gears are 16DP 14.5* PA)
127/100 transposing pair (80 kPSI ductile iron, all the other gears are 1144SP)
60 tooth idler
16, 20, 24, and 28 tooth stud gears
20, 25, and 50 tooth screw gears
Metric bracket in 6061 Al
Assorted spacers and fasteners
With this kit you can cut all of the pitches that the OEM Clausing kit allowed, except 5.5, 0.3, and 0.25mm
There are two different versions of the bracket, one for 4900 and earlier 5900 (before SN 502100) and another for 5900 after SN 502100. I have both versions of the brackets.
Cost is $340 + $12 USA shipping
Thanks, and regards.
Mike