dgcope
Cast Iron
- Joined
- Feb 7, 2003
- Location
- Athens GA USA
Has 4MT shank with 40 taper sleeve and S20x2 threads. As I understand, this was the standard arrangement for the Deckel Wohlhaupters, so they could be used in either of the Deckel spindles.
This one is very old (low serial number, ie. 50s or 60s I suspect) but seems to be in very good condition. Certainly above average.
It's silky smooth and I tested all the functions, which work perfectly.
$400 includes shipping in the USA.
This one is very old (low serial number, ie. 50s or 60s I suspect) but seems to be in very good condition. Certainly above average.
It's silky smooth and I tested all the functions, which work perfectly.
$400 includes shipping in the USA.