Marty Feldman
Titanium
- Joined
- Feb 21, 2005
- Location
- Falmouth, Maine
Looking for 2 belt grinder items:
[1] one 4" or 5" dia drive wheel, tired, sort of like this:
About 2.25" wheel width, for mounting on a 7/8 motor drive shaft - if needed, I can bore out a smaller dia hole and bush/insert bearing.
[2] some 2x72 belts, including scotchbrites, varying grits 40 or so to 260 or so. Diagonal butt jointed, not lapped.
Looking for used, in good condition. I know I can buy these items new, but am hoping to save a few bucks.
-Marty-
[1] one 4" or 5" dia drive wheel, tired, sort of like this:
About 2.25" wheel width, for mounting on a 7/8 motor drive shaft - if needed, I can bore out a smaller dia hole and bush/insert bearing.
[2] some 2x72 belts, including scotchbrites, varying grits 40 or so to 260 or so. Diagonal butt jointed, not lapped.
Looking for used, in good condition. I know I can buy these items new, but am hoping to save a few bucks.
-Marty-