WTB: Clausing Cabinet Drawers

Rick_B · Dec 4, 2015

Its a long shot I know but thought I'd check before I start trying to fabricate something. I need two drawers from a Clausing lathe cabinet - these are the drawers in the tail stock end of the cabinet. I presume there are many different Clausing cabinets - this one is from 1960. The rough drawer dimensions are 7 x 13 x 12. Let me knowif you have something you want to move along and we can verify specific dimensions.

Thanks

Rick

lazz · Dec 4, 2015

Rick_B said:
Its a long shot I know but thought I'd check before I start trying to fabricate something. I need two drawers from a Clausing lathe cabinet - these are the drawers in the tail stock end of the cabinet. I presume there are many different Clausing cabinets - this one is from 1960. The rough drawer dimensions are 7 x 13 x 12. Let me knowif you have something you want to move along and we can verify specific dimensions.

Thanks

Rick

I dont know if this is what you want but I have this.

Rick_B · Dec 4, 2015

Thanks for the offer but the cabinet I have is for an older lathe - it has drawers (well actually drawer holes

) in the tail stock end.

Rick

oxford · Dec 4, 2015

It might be easier for someone if you mention what model Clausing lathe it is.

Rick_B · Dec 4, 2015

oxford said:
It might be easier for someone if you mention what model Clausing lathe it is.

You're right - it is a 5418 lathe. I suspect the same cabinet parts were used on multiple models so I didn't want to limit the exposure.

Thanks for your suggestion
Rick

Search

Largest Manufacturing Technology Community on the Web

Search

WTB: Clausing Cabinet Drawers

Rick_B

Stainless

lazz

Stainless

Rick_B

Stainless

oxford

Cast Iron

Rick_B

Stainless

Similar threads