Ox
Diamond
- Joined
- Aug 27, 2002
- Location
- Northwest Ohio
Got this here e-mail and saw 45" Z travel. ???
As it is labeled an HMC and not a HBM it would seem to not have a "W" axis, but come-on, 45" Z travel without a quill? That would hafta have a spindle stem 2' long! (They must not believe in pics?)
The items offered in this auction are not being offered live. Bidding closes on October 22, 2009 @ 4:00 PM USCT, unless otherwise noted.
To go directly to the the event details page for this auction click the following link:
http://www.bidspotter.com/forms/event.php?event=8501
Preliminary auction information:
2004 TOYODA 5-Axis CNC Horizontal Machining Center, MDL. FA 800
PALLET SIZE: 31.5in. X 31.5in.
MAXIMUM PALLET LOAD: 5,500 LBS
TABLE INDEX INCREMENTS: 0.001in. CONTOURING
X - AXIS TRAVEL: 53.1in.
Y - AXIS TRAVEL: 45.2in.
Z - AXIS TRAVEL: 45.2in.
WORKPIECE SWING: 51.2in. X 51.2in.
RAPID TRAVERSE X, Y & Z: 944 IPM
CUTTING FEEDRATE: 0.04 - 944 IPM
AUTOMATIC TOOL CHANGER: 120
TOOLING TYPE: CAT # 50
SPINDLE SPEED RANGE: 35 - 12,000 RPM
SPINDLE DIAMETER: 4.33in.
MAIN SPINDLE MOTOR: 40 HP
APPROXIMATE DIMENSIONS: 191in.(LR) X 301in.(FB) X 165in.(H)
APPROXIMATE WEIGHT: 61,000 LBS
EQUIPPED WITH:
FANUC 16I MB CNC CONTROLLER
5-AXIS TRUNION TABLE & LOAD/UNLOAD STATION
COOLANT THROUGH SPINDLE
KNOLL FILTRATION SYSTEM
HPCC LOOK AHEAD
CONDITION: VERY GOOD
-------
Think Snow Eh!
Ox
As it is labeled an HMC and not a HBM it would seem to not have a "W" axis, but come-on, 45" Z travel without a quill? That would hafta have a spindle stem 2' long! (They must not believe in pics?)
The items offered in this auction are not being offered live. Bidding closes on October 22, 2009 @ 4:00 PM USCT, unless otherwise noted.
To go directly to the the event details page for this auction click the following link:
http://www.bidspotter.com/forms/event.php?event=8501
Preliminary auction information:
2004 TOYODA 5-Axis CNC Horizontal Machining Center, MDL. FA 800
PALLET SIZE: 31.5in. X 31.5in.
MAXIMUM PALLET LOAD: 5,500 LBS
TABLE INDEX INCREMENTS: 0.001in. CONTOURING
X - AXIS TRAVEL: 53.1in.
Y - AXIS TRAVEL: 45.2in.
Z - AXIS TRAVEL: 45.2in.
WORKPIECE SWING: 51.2in. X 51.2in.
RAPID TRAVERSE X, Y & Z: 944 IPM
CUTTING FEEDRATE: 0.04 - 944 IPM
AUTOMATIC TOOL CHANGER: 120
TOOLING TYPE: CAT # 50
SPINDLE SPEED RANGE: 35 - 12,000 RPM
SPINDLE DIAMETER: 4.33in.
MAIN SPINDLE MOTOR: 40 HP
APPROXIMATE DIMENSIONS: 191in.(LR) X 301in.(FB) X 165in.(H)
APPROXIMATE WEIGHT: 61,000 LBS
EQUIPPED WITH:
FANUC 16I MB CNC CONTROLLER
5-AXIS TRUNION TABLE & LOAD/UNLOAD STATION
COOLANT THROUGH SPINDLE
KNOLL FILTRATION SYSTEM
HPCC LOOK AHEAD
CONDITION: VERY GOOD
-------
Think Snow Eh!
Ox