atomarc
Diamond
- Joined
- Mar 16, 2009
- Location
- Eureka, CA
I have built a conveyor system per the customers prints which required it to be 'universally powered' anywhere in the world. The customer stipulated 12 DC motor, controls and batteries/charger.
This is a prototype...so the logic has changed midstream..now they would like a 120v AC option.
All the controls are in as well as the DC gear motor. The motor is a 12 volt DC motor rated at 900 watts, 1.2hp and full load current of 85 amps.
I want to stick some type of converter on the conveyor that I can plug into a 120 volt circuit, then into the existing DC stuff...and Bob's your uncle.
I found this. Amazon.com: AmpFlow SCN-1000-12 1000W, 80A, 12V DC Parallelable Power Supply : Electronics Am I kidding myself or would something like this work?
What am I missing here!
Stuart
This is a prototype...so the logic has changed midstream..now they would like a 120v AC option.
All the controls are in as well as the DC gear motor. The motor is a 12 volt DC motor rated at 900 watts, 1.2hp and full load current of 85 amps.
I want to stick some type of converter on the conveyor that I can plug into a 120 volt circuit, then into the existing DC stuff...and Bob's your uncle.
I found this. Amazon.com: AmpFlow SCN-1000-12 1000W, 80A, 12V DC Parallelable Power Supply : Electronics Am I kidding myself or would something like this work?
What am I missing here!
Stuart