I bought a brown and sharpe 618 which was running on 460v 3 phase. I was told it was wired for 220 but it clearly was being used at 460v. The wiring cabinet is beyond my understanding and I’m hoping someone could help me diagnose. I am hoping to run it off my American rotary phase converter for 220 3 phase power.
It seems the magnetic breakers are not engaging and I have no idea what needs to be changed. I’ve already wired the actual motor for the spindle to run on 220. When I turn it on the 110 transformer works so the mag chuck, light and dro are all working. Otherwise the other buttons don’t do anything. One of the Buttons when pressed makes a sound from the electrical cabinet but I don’t know what it’s doing.
/ATTAC
It seems the magnetic breakers are not engaging and I have no idea what needs to be changed. I’ve already wired the actual motor for the spindle to run on 220. When I turn it on the 110 transformer works so the mag chuck, light and dro are all working. Otherwise the other buttons don’t do anything. One of the Buttons when pressed makes a sound from the electrical cabinet but I don’t know what it’s doing.
/ATTAC