AlabamaGMC
Plastic
- Joined
- Mar 3, 2009
- Location
- Duck Springs,Alabama
Long time reader not much of a poster. I converted my machine a while back and been troubled ever since. I picked it up not knowing the state of welder to begin with.
I did the conversion step for step being careful with wires because its one of the first years they was built.
It's spits n sputters some. Melts wire but does not stick to metal.
I've cleaned the brushes and stoned the contactor suraces.
Whats next?
I did the conversion step for step being careful with wires because its one of the first years they was built.
It's spits n sputters some. Melts wire but does not stick to metal.
I've cleaned the brushes and stoned the contactor suraces.
Whats next?