I recently bought a small Kira drill/tapping machine. The previous owner replaced the controls with a no brand vfd.
I am planning to replace this with a 120v to 3ph unit, given that this is a small motor and I’d like to avoid running 230v line to it if possible.
WJ200-007MF | Hitachi Drives |
I would like to put this vfd in a stand under the machine and mount a control box on the machine featuring on/off, e-stop and a digital speed control.
So I’m wondering if this is a good choice of vfd for this purpose and if anyone can recommend a speed control that can be utilized here.
The motor is 230v 3ph, 0.4kw and draws 2.4amps.
Thank you!
I am planning to replace this with a 120v to 3ph unit, given that this is a small motor and I’d like to avoid running 230v line to it if possible.
WJ200-007MF | Hitachi Drives |
I would like to put this vfd in a stand under the machine and mount a control box on the machine featuring on/off, e-stop and a digital speed control.
So I’m wondering if this is a good choice of vfd for this purpose and if anyone can recommend a speed control that can be utilized here.
The motor is 230v 3ph, 0.4kw and draws 2.4amps.
Thank you!