Thompsonguitars
Aluminum
- Joined
- Jan 31, 2009
- Location
- Vernon BC Canada
But only when the spindle motor is turned on
forward or reverse .
The reason is to activate the (I think it's called)
potential relay or drop out relay in my rpc .
It is a timed relay that when
supplied with the 110v on motor start up will send
a little extra oomf for 1.2 seconds max.to get the 6 hp 50hz spindle motor going when I've got it in top speed .So the 110v has to cut out when spindle is shut off .Standard circuit with fwd. and rev. contactors
There is a 220 to 110 transformer already in place
that was for a work lamp . I'd be happy to lose the lamp if I can use the transformer for this other need .
Any help would be most appreciated .
Ted
forward or reverse .
The reason is to activate the (I think it's called)
potential relay or drop out relay in my rpc .
It is a timed relay that when
supplied with the 110v on motor start up will send
a little extra oomf for 1.2 seconds max.to get the 6 hp 50hz spindle motor going when I've got it in top speed .So the 110v has to cut out when spindle is shut off .Standard circuit with fwd. and rev. contactors
There is a 220 to 110 transformer already in place
that was for a work lamp . I'd be happy to lose the lamp if I can use the transformer for this other need .
Any help would be most appreciated .
Ted