I have a 10A 3% impedance TCI line reactor on the output side of my VFD to try to reduce the motor noise mentioned in the thread linked below. It makes it tolerable but I'd like to reduce it more to protect the motor.
I'd like to add capacitors and possibly resistors. I've found info on how to wire them but nothing on what values to use.
And some load filters have just caps and others have caps and resistors. Any advice on what would be needed for my application? I have a 240V single phase in 3HP VFD outputting 240V 3 phase.
Thanks!
Link: https://www.practicalmachinist.com/vb/transformers-phase-converters-and-vfd/fuji-frenic-mini-setup-359036/
I'd like to add capacitors and possibly resistors. I've found info on how to wire them but nothing on what values to use.
And some load filters have just caps and others have caps and resistors. Any advice on what would be needed for my application? I have a 240V single phase in 3HP VFD outputting 240V 3 phase.
Thanks!
Link: https://www.practicalmachinist.com/vb/transformers-phase-converters-and-vfd/fuji-frenic-mini-setup-359036/