rons
Diamond
- Joined
- Mar 5, 2009
- Location
- California, USA
One single phase 240VAC (Red,Black,Green 8 AWG) circuit. Want to branch two ways (Red, Black,Green 10 AWG).
Right now I have a regular 4"x4" 2" deep box. The twist nut approach would do it but the box would be packed.
I was thinking of screw connections but don't want to crimp on lugs.
Could the three ground (Green) wires be terminated on the box or should they be connected and isolated from the metal box?
Din rail mount screw terminals with shorting bars?
Use twist connectors and just cram everything in there and forget about?
What connector can be bought from places like DigiKey or Mouser?
Make a custom set of three bars with screw downs?
Right now I have a regular 4"x4" 2" deep box. The twist nut approach would do it but the box would be packed.
I was thinking of screw connections but don't want to crimp on lugs.
Could the three ground (Green) wires be terminated on the box or should they be connected and isolated from the metal box?
Din rail mount screw terminals with shorting bars?
Use twist connectors and just cram everything in there and forget about?
What connector can be bought from places like DigiKey or Mouser?
Make a custom set of three bars with screw downs?