Hughesy1991
Plastic
- Joined
- Jul 10, 2021
I've purchased a dust extractor that's 3 phase 415V. Understanding I can get an autotransformer and run a VFD. Before I do anything though I wanted to find out if I can run it at 240v 3 phase with a VFD.
Can't find any details on the motor whatsoever, just info off the data plate from the extractor itself.
Can anyone give me some advice on how I can tell if it's dual voltage, if possible in layman's terms. I understand electrical to a degree but am far from an electrical engineer, still learning as I go.
Thanks for your help.
I have some photos but still trying to work out how to upload them. First time posting.
Can't find any details on the motor whatsoever, just info off the data plate from the extractor itself.
Can anyone give me some advice on how I can tell if it's dual voltage, if possible in layman's terms. I understand electrical to a degree but am far from an electrical engineer, still learning as I go.
Thanks for your help.
I have some photos but still trying to work out how to upload them. First time posting.