jason lake
Plastic
- Joined
- Jul 7, 2016
Hello,
I recently purchased a Logan Lathe 922. I'm replacing the much needed Motor and wiring. The newer motor has 9 wires vs 4 on the original one.I've searched and searched the internet for a good example of my setup or combination of wires, but can't seem to find something close enough to what i have. It's just the stock setup, but I'd like to install an outlet too. The power would first go to the outlet, then on to the motor and switch. The extra outlet will be attached to the frame so I can plug in a light or fan. The outlet isn't important really, mostly figuring out which wires from the motor go where. Thanks in advance for taking a look.
I recently purchased a Logan Lathe 922. I'm replacing the much needed Motor and wiring. The newer motor has 9 wires vs 4 on the original one.I've searched and searched the internet for a good example of my setup or combination of wires, but can't seem to find something close enough to what i have. It's just the stock setup, but I'd like to install an outlet too. The power would first go to the outlet, then on to the motor and switch. The extra outlet will be attached to the frame so I can plug in a light or fan. The outlet isn't important really, mostly figuring out which wires from the motor go where. Thanks in advance for taking a look.