windsormw
Aluminum
- Joined
- Dec 11, 2006
- Location
- The corner of Hill & William
I recently wired a 15 kva 240/600 to my FW RPC . To my surprise I learned that their had to be a switch between the rpc and transformer .
I have dissconnected the transformer and now my rpc will not spin up to 1800 rpm . It just moans and rotates very slowly until it throws the breaker .
Could that transformer have damaged the rpc start circut ? I tested the start caps ( 3 - 270uf ) with my multimeter and they act the same as a brand new one .
leads of motor have 24-26 ohms between all phases .
thanks
Scott
I have dissconnected the transformer and now my rpc will not spin up to 1800 rpm . It just moans and rotates very slowly until it throws the breaker .
Could that transformer have damaged the rpc start circut ? I tested the start caps ( 3 - 270uf ) with my multimeter and they act the same as a brand new one .
leads of motor have 24-26 ohms between all phases .
thanks
Scott