Doug W
Hot Rolled
- Joined
- Sep 22, 2003
- Location
- Pacific NW
I have a shaded pole motor on a small right angle gear reducer that would be ideal for a diamond lap.
It has no capacitor and only hums when powered. It will start and seems to run fine by manually spinning the motor.
Bearings are good, no excess friction.
The leads to winding connections are clean w/o corrosion.
Any ideas?
It has no capacitor and only hums when powered. It will start and seems to run fine by manually spinning the motor.
Bearings are good, no excess friction.
The leads to winding connections are clean w/o corrosion.
Any ideas?