Parkerbender
Stainless
- Joined
- Dec 19, 2009
- Location
- Kansas City Mo, USA
Hey guys,
I am switching a saw over to 230, and for some reason the diagrams on yhe motors are not making any sense to me. I am used to the motors with 9 wires coming out and you tie a couple together here and there to supply, and then three of them together, or etc. These guys have 6 wires coming from the motor and 6 coming to the motor, and it seems that they are just wired straight through. I know that as it sits this is wired 460 because I have run it that way. What am I missing?
Thanks for any help!
-Patker
I am switching a saw over to 230, and for some reason the diagrams on yhe motors are not making any sense to me. I am used to the motors with 9 wires coming out and you tie a couple together here and there to supply, and then three of them together, or etc. These guys have 6 wires coming from the motor and 6 coming to the motor, and it seems that they are just wired straight through. I know that as it sits this is wired 460 because I have run it that way. What am I missing?
Thanks for any help!
-Patker
