First time posting here!
Just want to run this by you guys who are definitely more knowledgeable than myself. All work will be done by an electrician.
I'm setting up a manufacturing space and I need a transformer to convert the 3 phase 208V supply we have on site to 3 phase 400V to power the control panel for a piece of European machinery that we are getting soon.
I've been provided with the following info for main power supply: 400V / 50Hz / 3P / N / PE / 5kW
After researching, I believe this 15 kVA transformer should be more than sufficient, I chose aluminum over copper because we will only be using the setup for a few months, but can go with copper if advised. TEMCo Euro Standard Transformer TT1021 - 15 kVA
There is a 9 kVA version, but I think that would be maxing out if it draws ~ 12.5 Amps at 400V.
Thoughts / suggestions? Many thanks in advance!
Just want to run this by you guys who are definitely more knowledgeable than myself. All work will be done by an electrician.
I'm setting up a manufacturing space and I need a transformer to convert the 3 phase 208V supply we have on site to 3 phase 400V to power the control panel for a piece of European machinery that we are getting soon.
I've been provided with the following info for main power supply: 400V / 50Hz / 3P / N / PE / 5kW
After researching, I believe this 15 kVA transformer should be more than sufficient, I chose aluminum over copper because we will only be using the setup for a few months, but can go with copper if advised. TEMCo Euro Standard Transformer TT1021 - 15 kVA
There is a 9 kVA version, but I think that would be maxing out if it draws ~ 12.5 Amps at 400V.
Thoughts / suggestions? Many thanks in advance!