Hbjj
Cast Iron
- Joined
- Mar 18, 2013
- Location
- Washington st
I'm having trouble getting this drive running via the
0-10v analog inputs
It runs fine on the faceplate control and I have verified with a dvom that I have a 0-10 volt signal from the cnc control at the drive and is connected to agnd and avi inputs on the drive
as I change spindle speed on the cnc control i get a change in frequency on the display of the vfd but no output to the spindle.
My current vfd settings are
00-00=0
00-01=0
00-02=2
00-03=2
00-04=0
00-05=2
00-06=5
00-07=0
00-08=0.00
What did I miss?
0-10v analog inputs
It runs fine on the faceplate control and I have verified with a dvom that I have a 0-10 volt signal from the cnc control at the drive and is connected to agnd and avi inputs on the drive
as I change spindle speed on the cnc control i get a change in frequency on the display of the vfd but no output to the spindle.
My current vfd settings are
00-00=0
00-01=0
00-02=2
00-03=2
00-04=0
00-05=2
00-06=5
00-07=0
00-08=0.00
What did I miss?
