JasonPAtkins
Hot Rolled
- Joined
- Sep 30, 2010
- Location
- Guinea-Bissau, West Africa
In general, is it a problem to use transformers at voltages lower than their nameplate, as long as you expect an output that is proportionally less, as well?
My current application is to hope to use the below linked square d transformer (460/575 pri, 230/115 sec), using the 460 to 230 terminals (2:1) to transform 230 down to 115.
3SQ58110 - TRFMR DRY 1PH 3KVA 480/575V-120/240V | Schneider Electric
Conversations about transformers (flux and saturation) sound like Back to the Future to me, lol.
Thanks in advance!
My current application is to hope to use the below linked square d transformer (460/575 pri, 230/115 sec), using the 460 to 230 terminals (2:1) to transform 230 down to 115.
3SQ58110 - TRFMR DRY 1PH 3KVA 480/575V-120/240V | Schneider Electric
Conversations about transformers (flux and saturation) sound like Back to the Future to me, lol.
Thanks in advance!