michaelkellett
Plastic
- Joined
- Sep 23, 2019
I have a Baldor model 410B buffer that is simply too fast and too powerful for the size pieces that I am typically trying to polish, and I would like to slow the motor down with a speed control. Is this possible?
It's a 1.5hp, single phase, 60hz, 115v motor drawing 13.8 amps, so it requires something with a relatively high capacity. I tried one of the cheapo router speed controllers from HFT and it immediately blew the fuse in the controller (of course).
FWIW the motor currently runs at 3600 rpm.
It's a 1.5hp, single phase, 60hz, 115v motor drawing 13.8 amps, so it requires something with a relatively high capacity. I tried one of the cheapo router speed controllers from HFT and it immediately blew the fuse in the controller (of course).
FWIW the motor currently runs at 3600 rpm.