kustomizer
Diamond
- Joined
- Aug 17, 2007
- Location
- North Fork Idaho
I just unplugged this machine in California, hauled it to Idaho and plugged it back in. I turned on the spindle and it went the right direction, I thought hot damn it works and went on to something else. Most of my 240v stuff has worked just fine although a couple have needed bigger heaters in the starters. I turned on my chucker yesterday to work on some small project and I turned the 1-2 speed knob from max to about the middle and it went all the way to slow.
All 3 speeds are now slow as they go and it doesn't matter where I turn the knobs, so I thought I would ask here before I started exploring to see if this has an easy known solution.
thanks
mark
All 3 speeds are now slow as they go and it doesn't matter where I turn the knobs, so I thought I would ask here before I started exploring to see if this has an easy known solution.
thanks
mark