mrjackg
Plastic
- Joined
- Sep 11, 2013
- Location
- Melbourne, Australia
Hi,
I have done a bit of reading and am having trouble deciphering what the best solution would be for my particular issue.
I have a drill press and a linisher (belt Sander) both with 3 phase motors that I would like to convert to use on a single phase 240 volt power input (Australia).
I am not well versed in electrics/motors so I was hoping some of you friendly, knowledgeable people can advise?
Attached are pictures showing the machine and the name plate for information.
I was hoping to use a VFD solution, especially for the Drill Press (so I don't need to change the belts on the pulleys)
Your advise and help is much appreciated!!
I have done a bit of reading and am having trouble deciphering what the best solution would be for my particular issue.
I have a drill press and a linisher (belt Sander) both with 3 phase motors that I would like to convert to use on a single phase 240 volt power input (Australia).
I am not well versed in electrics/motors so I was hoping some of you friendly, knowledgeable people can advise?
Attached are pictures showing the machine and the name plate for information.
I was hoping to use a VFD solution, especially for the Drill Press (so I don't need to change the belts on the pulleys)
Your advise and help is much appreciated!!