AndyF
Stainless
- Joined
- Nov 3, 2003
- Location
- Phelps, NY, USA
What's my best path forward? I purchased a 36" powered slip roll at an auction and discovered that it was from Ontario with a C face 1 hp 575V motor and the control cabinet has a small 600V-120V transformer in it for the starter.
What is the most economical and straight forward solution?
1) Get a transformer to step up the 240V three phase generated by my American Rotary phase converter and install it on the machine?
2) Replace the motor with a 240V three phase motor and either replace or reconfigure the starter
3) Replace the motor with a single phase reversible motor.
4) ??? Any other solutions out there?
What is the most economical and straight forward solution?
1) Get a transformer to step up the 240V three phase generated by my American Rotary phase converter and install it on the machine?
2) Replace the motor with a 240V three phase motor and either replace or reconfigure the starter
3) Replace the motor with a single phase reversible motor.
4) ??? Any other solutions out there?