dIREsTRAITS
Plastic
- Joined
- Jan 23, 2019
- Location
- Southern Indiana
I bought a W/S #3 Turret Lathe universal ram type M-4630
I powered it on and noticed it has no oil pressure and no oil flow through the flow window. The spindle will not spin at any speed or in any direction.
Any help steering me in the right direction would be very appreciated!
I powered it on and noticed it has no oil pressure and no oil flow through the flow window. The spindle will not spin at any speed or in any direction.
Any help steering me in the right direction would be very appreciated!