Trying to get a #3 m2200 going question ref bar feed and collet action
Close
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Nov 2002
    Location
    Western ,Oh ,usa
    Posts
    489
    Post Thanks / Like
    Likes (Given)
    214
    Likes (Received)
    25

    Default Trying to get a #3 m2200 going question ref bar feed and collet action

    I am trying to get a #3 M2200 going to produce someparts.. from 3/4" barstock. The "push" type collet closer tube was badly stuck but moving free now. The ollet seems strong and centers well, wondering what would be a maximum length of .750 ....stock should be allowed to stick back in the push tube unsupported?
    The bar feeder has a rotating type of two jaw chuck that close tightly on 3/4 " stock.

    My main questions are Where.... How.... and from what material...... would be a starting point for the spindle stock supports....to keep things centered behind the collet....at speed.....and to be ushed on throughby the new piece in the barfeeder.
    that I assume must be inserted somewhere in the collet pushtube to center and support the incoming barstock...mylar ? Actel ? ?????

    I havent found anything in the manual or the Longstreet book on this

    Thanks Dave Lawrence


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •