Avoiding wood splitting while drilling
Close
Login to Your Account
Results 1 to 11 of 11
  1. #1
    Join Date
    Mar 2019
    Country
    UNITED KINGDOM
    Posts
    10
    Post Thanks / Like
    Likes (Given)
    14
    Likes (Received)
    1

    Default Avoiding wood splitting while drilling

    Hi,

    I'm making a jewelry box for my granddaughter and need to avoid the pine splitting when I attach the hinges.

    Should I use self drilling screws?

  2. #2
    Join Date
    Apr 2012
    Location
    New Zealand
    Posts
    657
    Post Thanks / Like
    Likes (Given)
    160
    Likes (Received)
    188

    Default

    Quote Originally Posted by Harrycrowther View Post
    Hi,

    I'm making a jewelry box for my granddaughter and need to avoid the pine splitting when I attach the hinges.

    Should I use self drilling screws?
    No, use a twist drill slightly larger than the centre section of the screw thread.
    Beeswax on the screws too, because they will be small and delicate

  3. #3
    Join Date
    Jul 2004
    Location
    central NC
    Posts
    2,561
    Post Thanks / Like
    Likes (Given)
    30
    Likes (Received)
    656

    Default

    The concept you are seeking to learn about is called a "pilot hole".

    Steve

  4. #4
    Join Date
    Aug 2015
    Country
    UNITED STATES
    State/Province
    Illinois
    Posts
    1,330
    Post Thanks / Like
    Likes (Given)
    956
    Likes (Received)
    564

    Default

    There are tapered bits specifically for pilot holes for wood screws.

  5. #5
    Join Date
    Jun 2012
    Country
    UNITED STATES
    State/Province
    Michigan
    Posts
    9,894
    Post Thanks / Like
    Likes (Given)
    3340
    Likes (Received)
    3546

    Default

    One cant beat s small bench drill press for such work. You may find yourself doing much more work with such a machine.

  6. Likes backindaday liked this post
  7. #6
    Join Date
    Mar 2010
    Location
    pacific northwest
    Posts
    952
    Post Thanks / Like
    Likes (Given)
    6
    Likes (Received)
    183

    Default

    Quote Originally Posted by Illinoyance View Post
    There are tapered bits specifically for pilot holes for wood screws.
    Against conventional knowledge, I will recommend against this practice. Being a former boatbuilder, I have drilled many thousands of holes with tapered drill bits and countersink- This works fine on softwood, or big work- although I have never noticed the slightest improvement in holding power ascribed to the taper.

    The problem is that a tapered drill bit is, in essence, a cylindrical wedge, with a screw feed (the flutes). It is very easy to have the bit pull into a delicate part, or near the end of a part, and split the wood.

  8. Likes Pattnmaker, memphisjed liked this post
  9. #7
    Join Date
    Dec 2014
    Country
    CANADA
    State/Province
    British Columbia
    Posts
    1,255
    Post Thanks / Like
    Likes (Given)
    354
    Likes (Received)
    579

    Default

    Clamp a piece of sacrificial wood to the backside(inside?) of the box to prevent blowing out the backside of the hole.

  10. #8
    Join Date
    Mar 2009
    Country
    UNITED STATES
    State/Province
    California
    Posts
    4,869
    Post Thanks / Like
    Likes (Given)
    89
    Likes (Received)
    900

    Default

    Been using this set. Drill bits are tapered to five different screw sizes. Adjustable collars and plug cutters. Typical use:

    A Honduras Mohogany bookshelf with black ebony plugs.

    W.L. Fuller Inc.

  11. #9
    Join Date
    Jun 2003
    Location
    New York State
    Posts
    761
    Post Thanks / Like
    Likes (Given)
    45
    Likes (Received)
    84

    Default

    Throw away the wood screws and use sheet metal screws. Then drill a standard hole.

    Pete

  12. #10
    Join Date
    Jul 2006
    Location
    rochester, ny
    Posts
    1,873
    Post Thanks / Like
    Likes (Given)
    377
    Likes (Received)
    517

    Default

    +1 for Pete's suggestion!

    Sheet metal screws hold way better than wood screws. Just about every piece of furniture I made in the last 40 years was assembled with #12 phillips sheet metal screws, black oxidized for sexiness. Except for visible hardware, hinges and such, used slotted brass wood screws. Just looked better to my eye, especially with the slots lined up.

  13. #11
    Join Date
    Apr 2012
    Location
    New Zealand
    Posts
    657
    Post Thanks / Like
    Likes (Given)
    160
    Likes (Received)
    188

    Default

    Quote Originally Posted by crzypete View Post
    Throw away the wood screws and use sheet metal screws. Then drill a standard hole.

    Pete
    Or just drill a hole anyway. Tapered drills have their place when dealing with 10ga and larger screws but seriously, we are talking a box hinge here- screws likely 5ga or smaller.

    One could also use a bradawl, quicker and better holding power IIRC. Very old fashioned though


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •