stephen thomas
Diamond
- Joined
- Jun 3, 2001
Lazy, did not google anything yet.
Old client that has spent quite a bit with me for new furniture in past decades sent the rolled up slats from a roll top by another maker hoping i can fix/provide better solution. As received slats are nicely held by overlapping layers of exterior grade duct tape that seems to have served pretty well for a while. But areas have lost adhesion leaving the slats to shift &/or pop loose. Under that the original backer seems to be some sort of paper?
Obviously everything on the back will have to be stripped to 7bare wood.
Whats considered the best current product for assembling such constructions?
thanks,
smt
Old client that has spent quite a bit with me for new furniture in past decades sent the rolled up slats from a roll top by another maker hoping i can fix/provide better solution. As received slats are nicely held by overlapping layers of exterior grade duct tape that seems to have served pretty well for a while. But areas have lost adhesion leaving the slats to shift &/or pop loose. Under that the original backer seems to be some sort of paper?
Obviously everything on the back will have to be stripped to 7bare wood.
Whats considered the best current product for assembling such constructions?
thanks,
smt