Error 95 on MAHO 600W, with Philips 532 control.

[simbad]

Dear colleges,

Please advice me on a problem:

We have MAHO 600W, with Philips 532 control.


After enabling , we have a permanent error №95.
We’ve tried everything possible, checking the el. Diagram, changes of processor and video cards, different types of software – no change!

At input №40, which should be responsible for that error, we have 24V, from the spindle drive. Also is shown on the screen.
After that, nevertheless we took out the cable from I140 and the active input disappears from the screen – the error remains!


Thanks in advance.
Best regards

Svet