Pellethuntr
Plastic
- Joined
- Aug 15, 2013
- Location
- Livonia NY
Hi all, long time lurker/reader but finally found a question I couldn't answer myself.
I bought an MT4.5 - MT3 adapter sleeve from Grizzly. Part number P97302912.
I had read on a few different posts from here and other forums that this was a direct copy of the original South Bend made adapter and that it would work in the older machines.
It came today and I took it out to the shop to have a look. It's a nice snug fit but it seems a little short? Maybe I am wrong and that is how they are suppose to be?
I was really hoping that this one would work, the originals are a bit expensive for my taste.
I bought an MT4.5 - MT3 adapter sleeve from Grizzly. Part number P97302912.
I had read on a few different posts from here and other forums that this was a direct copy of the original South Bend made adapter and that it would work in the older machines.
It came today and I took it out to the shop to have a look. It's a nice snug fit but it seems a little short? Maybe I am wrong and that is how they are suppose to be?
I was really hoping that this one would work, the originals are a bit expensive for my taste.