morsetaper2
Diamond
- Joined
- Jul 2, 2002
- Location
- Gaithersburg, MD USA
FS: Hardinge Dividing Head Tailstock, $130 +shipping
Excellent condition, center is in great shape, 3-5/8 inch center height.
The body casting as been slightly altered from original:
Shipping by USPS FR box will be $16.00. Payment by paypal. Or I will accept a check or MO from an established member with a solid post history.
Excellent condition, center is in great shape, 3-5/8 inch center height.
The body casting as been slightly altered from original:
- Central mounting T-slot bolt through hole has been slightly offset. And the corresponding surface for washer & nut extended to edge as well.
- Two addtl holes for key attachment were added by previous owner. The inner pair (in photos), which are #10-32, are the added holes. Note they let the tap drill just break thru on other side. The original standard holes (outer pair) are #10-24. For whatever reason, previous owner setup the center on offset keys as you can see in photo.
Shipping by USPS FR box will be $16.00. Payment by paypal. Or I will accept a check or MO from an established member with a solid post history.
Attachments
-
hardinge_TS_02.jpg626.9 KB · Views: 9
-
hardinge_TS_03.jpg916.5 KB · Views: 9
-
hardinge_TS_04.jpg159.7 KB · Views: 9
-
hardinge_TS_05.jpg841.5 KB · Views: 9
-
hardinge_TS_06.jpg442 KB · Views: 10
-
hardinge_TS_07.jpg886.2 KB · Views: 10
-
hardinge_TS_08.jpg839.1 KB · Views: 10
-
hardinge_TS_09.jpg511.5 KB · Views: 12
-
hardinge_TS_10.jpg512.8 KB · Views: 12
Last edited: