916DUC
Plastic
- Joined
- Feb 26, 2009
- Location
- Hopewell, NJ
I am doing a little shop rearranging and would like to offer up this old Emmert vise for sale. Thought I would post it on here hoping someone might like it. I have a turtleback and a K1 that I use constantly and don't use this as much as I thought I would. I acquired it a few years ago from an old woodworker who is in his 90's and closed up shop. He has had it since the 50's he said.
It is a 101 Blacksmith Machinist vise with the rotating three jaw head. Comes with the original post mount v groove jaws and an extra post mount stepped groove jaw. Condition is very good. Has not been repainted, just cleaned up. Swivel base. I have a couple of pics and I'll post more as soon as I can.
Honestly, I don't know what to ask, I have only seen a couple of these sell and a similar one was sold for around 3.5K if memory serves. Shipping I am sure will be a lot as this is 100 lbs give or take. If I was to post this on eBay, I think I would start it a 2k or a little more. I am open to offers and any suggestions. My location is central New Jersey if your close and want to come see it.
It is a 101 Blacksmith Machinist vise with the rotating three jaw head. Comes with the original post mount v groove jaws and an extra post mount stepped groove jaw. Condition is very good. Has not been repainted, just cleaned up. Swivel base. I have a couple of pics and I'll post more as soon as I can.
Honestly, I don't know what to ask, I have only seen a couple of these sell and a similar one was sold for around 3.5K if memory serves. Shipping I am sure will be a lot as this is 100 lbs give or take. If I was to post this on eBay, I think I would start it a 2k or a little more. I am open to offers and any suggestions. My location is central New Jersey if your close and want to come see it.