awander
Stainless
- Joined
- Jun 11, 2012
- Location
- Eastern PA
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
identify this toolholder with tapered dovetails?
- Thread starter awander
- Start date
- Replies 7
- Views 1,264
awander
Stainless
- Joined
- Jun 11, 2012
- Location
- Eastern PA
SIP6A
Titanium
- Joined
- May 29, 2003
- Location
- Temperance, Michigan
I'v got Schaublin tool blocks that look like that. The knurled knobs are to move tapered wedges to adjust tool height. Could be shop made seeing it has no makers name on it.
SBLatheman
Titanium
- Joined
- Jul 7, 2008
- Location
- South Bend, In
It is a South Bend front tool post for a double tool cross slide. Without dimensions, I can not determine which size machine it fits.
As SIP6A said, the tapered wedges are missing.
Ted
lazz
Stainless
- Joined
- Feb 12, 2012
- Location
- The warm desert of Phoenix Arizona
I got one of those....
awander
Stainless
- Joined
- Jun 11, 2012
- Location
- Eastern PA
Thanks, Guys!
The overall height of the toolpost is 2-3/4". The top of the slot is at 2"
The post is 2" square. Can you tell from that which models it fits?
And thanks for mentioning the wedges-I have them, but I didn't realize they were for this toolpost.
SBLatheman
Titanium
- Joined
- Jul 7, 2008
- Location
- South Bend, In
That would fit the double tool cross slide on the 9” and the Heavy 10, not the 10K.
Ted
awander
Stainless
- Joined
- Jun 11, 2012
- Location
- Eastern PA
Thanks, Ted.