jpikston
Aluminum
- Joined
- Jun 5, 2005
- Location
- mid-Michigan
![IMG_5656.jpeg IMG_5656.jpeg](https://www.practicalmachinist.com/forum/data/attachments/381/381512-133e2ce76883cfd5bfd2159eb5440d72.jpg)
The nameplate says-
1hp
Single phase
3450 rpm.
![IMG_5665.jpeg IMG_5665.jpeg](https://www.practicalmachinist.com/forum/data/attachments/381/381514-00b744e9171f444af9c2540dce0ba569.jpg)
![IMG_5666.jpeg IMG_5666.jpeg](https://www.practicalmachinist.com/forum/data/attachments/381/381515-8b5da658c9b4b3f625f1731d344883d7.jpg)
![IMG_5670.jpeg IMG_5670.jpeg](https://www.practicalmachinist.com/forum/data/attachments/381/381516-da6000708739378038bc2dffba217089.jpg)
So I got six wires.
Red goes to the capacitor.
The cap. tests within spec.
I can I’d four of the six wires by color.
(Blue, red, white w/black stripes, white w/red stripes)
The last two of the six wires look like a sand, light yellow color?
I have measured the resistance values. X in the diagram pictured is an open circuit.
This is all I got.
Can anyone more knowledgeable help me out?
Thanks,
Ed