Ellismachine
Plastic
- Joined
- May 23, 2018
Consider me a newbie even though I've been around manual machine tools all my life.
I've aquired a Kondia with Proto Trak computer.
I'm trying to self teach myself basic operations using the operators / owners manual, but I've run into a problem while trying to do a simple rectangle pocket cut.
I can't get a tool programmed into it.
The question is,,,,,,,other than the boot disk, do I have to have a programing disk ( blank floppy) in it to be able to name and number tool diameters?
Many thanks in advance
All inputs are being done at the controller or display.
I've aquired a Kondia with Proto Trak computer.
I'm trying to self teach myself basic operations using the operators / owners manual, but I've run into a problem while trying to do a simple rectangle pocket cut.
I can't get a tool programmed into it.
The question is,,,,,,,other than the boot disk, do I have to have a programing disk ( blank floppy) in it to be able to name and number tool diameters?
Many thanks in advance
All inputs are being done at the controller or display.
