winger
Stainless
- Joined
- Dec 28, 2005
- Location
- portage county, wisconsin
One of the guys I work with just had to put a cheater bar on the chuck key and broke off a tooth on the pinion.
the chuck is a 6" 6jaw and about 40 years old. It was still pretty good.
Any way, there is a counterbore for a logo on the face but the label is long gone. Inside I did find a horse head logo. Any one have a clue as to the brand.
Lathe (Doall/ Harrison) was bought in 1978, but this chuck was probably a year or two later.
MSC catalog has pinions for Bison and Gibraltor, but they do not look close.
Checked Travers and McMaster, no joy.
Thought it might be a Buck.
Buck's web sight has been mostly unresponsive for me tonight.
Dave
the chuck is a 6" 6jaw and about 40 years old. It was still pretty good.
Any way, there is a counterbore for a logo on the face but the label is long gone. Inside I did find a horse head logo. Any one have a clue as to the brand.
Lathe (Doall/ Harrison) was bought in 1978, but this chuck was probably a year or two later.
MSC catalog has pinions for Bison and Gibraltor, but they do not look close.
Checked Travers and McMaster, no joy.
Thought it might be a Buck.
Buck's web sight has been mostly unresponsive for me tonight.
Dave
Last edited: