AlfaGTA
Diamond
- Joined
- Dec 13, 2002
- Location
- Benicia California USA
Have a mill table that i wish to have planed with a broad nose pattern.
Table is rectangular 17x28 need the pattern to run in the 28" direction...
Looking for a shop that has a working planer with a machinist that can do this work,
Shipping is a bit of an issue due to weight, so looking for a resource close to the SF bay area if possible.
Cheers Ross
Table is rectangular 17x28 need the pattern to run in the 28" direction...
Looking for a shop that has a working planer with a machinist that can do this work,
Shipping is a bit of an issue due to weight, so looking for a resource close to the SF bay area if possible.
Cheers Ross